Sign In | Join Free | My rc363.com
China TAKFLY COMMUNICATIONS CO., LTD. logo
TAKFLY COMMUNICATIONS CO., LTD.
Make FTTH spread all over the world, and make better connectivity for a better life
Verified Supplier

6 Years
Home > Optical Transceiver Module >

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

Product Categories
TAKFLY COMMUNICATIONS CO., LTD.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

  • 1
  • 2
  • 3

Speed : 10Gbps

Transmission Distance : 300M

Fiber Mode : Multimode

Compatible Switch Brand : CISCO/HP/Huawei/H3C/Juniper/ZTE/........

Grade : Commercial Grade/Industrial Grade

Wavelength : 850nm

Brand Name : Takfly

Model Number : TKSFPP8510GSR

Certification : CE,ROHS,FCC,REACH,ISO9001,ISO14001

Place of Origin : China

MOQ : 1 piece

Price : USD 6~ USD 10

Payment Terms : T/T, Western Union, , Paypal, L/C

Supply Ability : 30000pcs/month

Delivery Time : 3-5 working days

Packaging Details : blister box + spone + carton

Contact Now

10Gbps 850nm 300M SFP+ Optical Transceiver Module compatible with CISCO / HP / H3C / Juniper / Huawei

Description

This 850 nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125μm or 62.5/125μm multimode optical fiber (Table 1).
Fiber Type Minimum model bandwidth @850nm(MHz-km) Operating range (meters)
62.5um MMF 160 2~26
200 2~33
50um MMF 400 2~66
500 2~82
2000 2~300

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ.
TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 kΩ to 10 kΩ resistor The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 kΩ, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.

Features

  • Optical interface compliant to IEEE 802.3ae
  • Electrical interface compliant to SFF-8431
  • Hot Pluggable
  • 850nm VCSEL transmitter, PIN photo-detector
  • Maximum link length of 300m on 2000MHz/km MMF
  • Operating case temperature: 0 to 70 °C
  • Low power consumption
  • Maximum link length of 300m on 2000MHz/km MMF
  • All-metal housing for superior EMI performance
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth
  • RoHS6 compliant (lead free)​

Applications

  • 10GBASE-SR at 10.3125Gbps
  • 10GBASE-SW at 9.953Gbps
  • Other optical links​

Absolute Maximum Ratings

Parameter Symbol Min. Typical Max. Unit
Ref.
Maximum Supply Voltag
Vcc
-0.5
4.7
V
Storage Temperature
 TS -40 85
°C
Case Operating Temperature
Tcase
 -5 70 °C


Dimension

Comply to SFF-8432 rev5.0, the improved Pluggable form factor specification.
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

Product Tags:

10Gbps SFP+ Optical Transceiver Module

      

10g sfp+ transceiver

      

850nm 300M Optical Transceiver Module

      
China 10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei wholesale

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: TAKFLY COMMUNICATIONS CO., LTD.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like
Inquiry Cart 0